IBMS Machining
Machining Equipment
Our highly specialized machining equipment allows us to provide clients with unique capabilities not seen in other machining shops. For example, the Doonsan VTL has a 32 inch diameter hydraulic chuck. With this chuck IBMS has the ability to turn medium to large components.
Our Doosan VTL can be program as a conventional lathe doing simple turning, boring and center line drilling. Or utilizing the live tooling, drill and tap in the z axis doing bolt hole patterns or drill and tap in the X axis.
With this capability IBMS can eliminate the number of setups required to machine our clients parts, our client’s cost goes down and eliminates the errors that occur when moving components from one machine to another.
On the other hand our Vertical Machining Centers are equipped with high pressure coolant through the spindle, spindles are BT40 Big Plus. The advantage here is solid tool contact with the machine spindle.
Each machine is wired to accept a Yuasa Rotary indexing table.
With our two machines IBMS covers the rpm range for most materials with one machine having an 8,000 rpm spindle the other 12,000 rpm. With this range we are able to drill, mill and tap in either aluminum or steels.
IBMS utilizes Tool Life Management on both machines to eliminate premature tool failures.
Along with working with major tooling suppliers such as Sandvik, Ham Precision, Balax and YG, with their help we are looking at new ways to decrease cycle times and improve quality.
|
 |
 |
|
|
 |
Metrology Equipment:
DEA 2203 Coordinate Measuring Machine w/ Open DMIS software
X 96”
Y 54”
Z 48”
Renishaw PH10M Probe
Various Manual Gauges
